Genie Z-60/34: Specs, Price and Buying Guide

Last updated: October 2026

The Genie Z-60/34 is a 60 ft rough terrain articulating boom lift with a 6 ft jib, about 66 ft of working height and 36 ft 3 in of horizontal reach. Genie built it from the 1990s until about 2014, when the Z-62/40 replaced it, so every Z-60/34 for sale today is a used machine.

This guide covers the Z-60/34’s specs, what it sells for on FleetNow, how it compares with the Genie Z-62/40, JLG 600AJ and Skyjack SJ63 AJ, and what to check before you buy an older boom.

In this guide:

• Genie Z-60/34 specs
• Model history and the Z-62/40
• Key features and common uses
• Z-60/34 vs Z-62/40, JLG 600AJ and Skyjack SJ63 AJ
• Pros and cons
• Genie Z-60/34 price
• What to check before buying used
• FAQs

Specs are from Genie’s North American spec sheets (2006 and 2011). Early units from the 1990s list a 60 ft platform height and 34 ft of reach, and some used a Ford 63 HP or Deutz 56 HP engine, so check the serial plate and decals on the machine you are buying.

The Z-60/34 was one of Genie’s longest-running booms, built from the 1990s into the 2010s. In 2014 and 2015, Genie replaced it with the Z-62/40, which Genie described as an update of the Z-60/34. The Z-62/40 added Tier 4 Final engines, more reach (40 ft 9 in) and a 5 ft jib with a wider 135° range, and current units have load sensing for the ANSI A92.20 standard.

The Z-60/34 never received Tier 4 Final engines or load sensing as far as Genie’s spec sheets show. That keeps the machine simpler. Older booms can still be used when they are inspected and maintained under the current ANSI rules, but some contractors set their own equipment requirements, so check before you buy. Genie’s electric and hybrid 60 ft booms (the Z-60 DC and Z-60 FE) are a separate line. Read our Genie articulating boom lift guide for the full lineup.

• Height and reach: About 66 ft of working height and 36 ft of reach for exterior work on multi-story buildings.
• Up-and-over: The articulating riser lets the platform reach over obstacles about 27 ft high, such as rooftop equipment or parapets.
• 6 ft jib: The jib moves up and down through 90° for fine positioning near the work. It does not swing side to side; the platform itself rotates 180°.
• Continuous rotation and zero tailswing: The turntable rotates 360° continuously, and the counterweight stays inside the footprint, which helps near walls and traffic.
• Large platform option: Many units have the 8 ft x 3 ft platform, which gives room for two workers and materials within the 500 lb rating.
• Simple machine: No Tier 4 Final aftertreatment and no load sensing system to troubleshoot.

Common jobs: exterior building maintenance, steel erection, glazing, roofing and HVAC access, signage, painting, tree work and film or event lighting.

These are the closest 60 ft articulating booms on the used market. The newer machines add 3 to 4 ft of reach and Tier 4 Final engines, while the Z-60/34 is usually the least expensive.

If you need more reach or newer engines, a Z-62/40 or JLG 600AJ costs more but will usually have fewer hours. If you need a higher platform capacity, the Skyjack SJ63 AJ+ and SJ60 AJ+ carry 660 lb. For a straight boom alternative, see our Genie S-65 guide, and for smaller jobs, the Genie Z-45/25J RT guide.

• Lower price than newer 60 ft articulating booms
• 27 ft up-and-over, higher than the Z-62/40
• 360° continuous turntable rotation and zero tailswing
• Simple engines with no Tier 4 Final aftertreatment
• Diesel or dual-fuel engines and 4WD for rough sites

• Out of production since about 2014, so all units are at least 10 years old
• High hours are common (the median FleetNow listing had about 3,000 hours)
• 500 lb capacity and no load sensing
• Less reach than the Z-62/40, JLG 600AJ and Skyjack SJ63 AJ
• Older engines may not meet emissions rules on some job sites

In October 2026, FleetNow had 56 priced Genie Z-60/34 listings from 2006 to 2014, with a median of about 3,000 hours. Most listed for $29,000 to $36,300. Because all units are older, condition, hours and inspection history matter more than model year.

The Z-60/34 is no longer sold new. Its replacement, the Genie Z-62/40, was advertised new at about $127,550 in 2026.

Things that raise the price: lower hours, 4WD, the larger 8 ft platform, a recent annual inspection, good tires and service records. High hours, worn wear pads, play in the turntable bearing, leaks and engine problems lower it.

• Year, serial number and engine: Check the serial plate for the model year and serial range (Genie’s manuals change at certain serial numbers), whether it is 2WD or 4WD, and which engine it has.
• Inspection records: Ask for the latest annual and frequent inspection reports and the service history. On a boom this age, a fresh annual inspection by a qualified mechanic is worth paying for.
• Boom wear pads: Genie’s service manual calls for replacing pads worn below 9/16 in. Extend the primary boom fully and watch for binding, scraping or sag.
• Turntable bearing: Check for play and ask whether the bearing bolts have been torqued on schedule. A worn bearing is a safety issue and an expensive repair.
• Jib and platform rotator: Run the jib through its full range and rotate the platform both ways. Look for play at the pins and leaks at the rotator.
• Hydraulics: Check cylinders, hoses and fittings for leaks, and ask when the hydraulic oil and filters were last changed.
• Drive hubs, axle and brakes: Check drive hub oil, test the oscillating axle on 4WD units, and test the drive brakes and free-wheel setting.
• Engine: Look for leaks, hard starting and smoke, and test both fuels on dual-fuel units. Parts for older engines can take longer to find.
• Controls and safety: Test the platform and ground controls, emergency stops, tilt alarm, foot switch, platform leveling and the ground control override.
• Tires: Check tread, sidewalls and lug nut torque.

The FleetNow Inspect app helps you record a walkaround inspection with photos before you buy.

FleetNow lists used Genie Z-60/34 boom lifts from rental companies and dealers across the country.

• Used Genie Z-60/34 lifts
• Newer Genie models: Z-62/40 and Z-80/60, or all used Genie articulating boom lifts
• Other brands: JLG 600AJ and Skyjack SJ63 AJ, or all used articulating boom lifts
• Learn more: our Genie boom lift guide covers the full lineup

Can’t find what you need? Contact us or call 1-216-973-5124. Have a boom lift to sell? List your equipment on FleetNow.