JCB 507-42 Telehandler: Specs, Price and Buying Guide
Last updated: November 2026
The JCB 507-42 is a mid-size telehandler that lifts 7,000 lb to a height of 42 ft. A 74 hp JCB diesel, a 4-speed powershift transmission, four-wheel drive and three steering modes make it a common pick for residential and light commercial framing, masonry and material handling, and used units are among the lowest-priced JCB telehandlers on FleetNow.
This guide covers JCB 507-42 specs, how it compares with other 7,000 to 9,000 lb telehandlers, current FleetNow prices, and what to check before you buy.
In this guide:
JCB 507-42 Specs
| Specification | JCB 507-42 |
|---|---|
| Max lift capacity | 7,000 lb (3,175 kg) |
| Max lift height | 42 ft (12.8 m) |
| Capacity at max height | 6,000 lb (2,722 kg) |
| Max forward reach | About 28 ft (8.5 m) |
| Capacity at max reach | 1,600 lb (726 kg) |
| Engine | JCB 4.4 L four-cylinder diesel, 74 hp (55 kW); current units are Tier 4 Final with no DEF or DPF |
| Transmission | 4-speed powershift |
| Max travel speed | 15.5 mph (25 km/h) |
| Drive and steering | Four-wheel drive; three steering modes |
| Frame leveling | Up to 10 degrees left and right |
| Operating weight | About 21,300 lb (9,660 kg) |
| Length / width / height | 21 ft 3 in / 7 ft 10 in / 8 ft 3 in (6.48 / 2.39 / 2.53 m) |
| Wheelbase | 124 in (3.15 m) |
| Hydraulics | 29 gpm pump, 3,700 psi |
| Fuel tank | About 31 to 35 gal, depending on year |
| Cab | Open ROPS/FOPS canopy or enclosed cab with heat and A/C |
JCB lists the 7,000 lb capacity, 42 ft height and Tier 4 Final engine on its 507-42 page but does not publish the full spec sheet online, so the other figures come from dealer spec listings for 2013 to 2025 units. Values such as weight, fuel tank size and tires vary by year and build, and one rental spec lists a synchromesh transmission. Always check the load chart in the cab and the serial plate on the machine you are buying.
JCB 507-42 Key Features
- 7,000 lb to 42 ft: enough for pallets of block, shingles, lumber and trusses on residential and light commercial jobs.
- Three steering modes: two-wheel steer for travel, four-wheel steer for tight turns, and crab steer for moving sideways along a wall.
- Frame leveling: up to 10 degrees each way to level the machine on uneven ground before lifting.
- Simple drivetrain: a 74 hp JCB diesel with a 4-speed powershift and four-wheel drive. Current Tier 4 Final engines need no DEF and no diesel particulate filter.
- Easy controls: a fully proportional single-lever joystick with low-effort servo controls and, on newer units, a color display.
- Service access: side-mounted engine with a gas-assisted hood and 500-hour wear pad service intervals.
- Cab choice: open canopy or fully glazed cab, both ROPS and FOPS certified.
JCB 507-42 vs Similar Telehandlers
| Model | Capacity | Lift height | FleetNow middle half (older units) |
|---|---|---|---|
| JCB 507-42 | 7,000 lb | 42 ft | $39,850 to $48,850 |
| JCB 509-42 | 9,000 lb | 42 ft | $39,000 to $63,850 |
| Genie GTH-844 | 8,000 lb | 43 ft 10 in | $49,900 to $70,700 |
| SkyTrak 8042 | 8,000 lb | About 42 ft | See listings |
Prices are from the JCB telehandler guide (FleetNow listings, November 2026, units 2023 and older). The 507-42 is usually the lowest-cost way into a 42 ft telehandler. Step up to the 509-42 or an 8,000 lb Genie GTH-844 or SkyTrak 8042 if you regularly lift more than 6,000 lb at height. Read our JCB telehandler guide, our Genie GTH-844 guide, or compare the smaller JCB 506-36 in our 506-36 guide.
JCB 507-42 Price
JCB does not publish list prices. One dealer listed a new 2025 507-42 at $140,000 in 2026, and a new 2026 unit on FleetNow is listed at $137,850. Used prices below come from the 34 priced JCB 507-42 listings on FleetNow in November 2026 (112 to 4,718 hours).
| Used JCB 507-42 on FleetNow | Asking price |
|---|---|
| Price range (34 listings) | $29,950 to $137,850 |
| Middle half of listings | $39,850 to $54,000 |
| Median asking price | $42,850 |
| 2012 to 2016 models (5 listings) | $29,950 to $119,000 |
| 2017 models (3 listings) | $38,850 to $42,850 |
| 2018 models (7 listings) | $38,950 to $48,800 |
| 2019 models (13 listings) | $37,850 to $55,100 |
| 2021 to 2022 models (5 listings) | $59,850 to $83,850 |
| 2026 model (1 listing, new) | $137,850 |
Hours, cab type, tires and attachments affect price as much as model year. See current JCB 507-42 listings.
Common Uses for the JCB 507-42
- Residential framing: lifting lumber, trusses and sheathing to upper floors
- Masonry: placing pallets of block and brick on scaffolding
- Roofing: loading shingles and materials onto roofs
- Unloading trucks and moving materials around the jobsite
- Agriculture: moving bales, feed and supplies
- Bucket, sweeper and other attachment work on compatible carriages
JCB 507-42 Pros and Cons
| Pros | Cons |
|---|---|
| Low used prices for a 42 ft telehandler | 7,000 lb capacity drops to 1,600 lb at full reach |
| Three steering modes and frame leveling | 74 hp is modest next to 9,000 lb machines |
| Current engines need no DEF or DPF | JCB dealers are less common than Genie, JLG and SkyTrak in some areas |
| Proportional joystick controls | Specs and parts vary by model year, so check the serial plate |
Used JCB 507-42 Buying Checklist
- Boom: check wear pads, boom sections, chains or hoses for wear, cracks or weld repairs, and look for drift with a load raised.
- Hydraulics: look for leaks at cylinders, the valve block and hoses, and confirm smooth lift, extend, tilt and frame leveling.
- Engine: cold start, check for blow-by, smoke and leaks, and review service records and hours.
- Transmission and axles: test all four gears forward and reverse, four-wheel drive and all three steering modes.
- Brakes: test the service and parking brakes on a grade.
- Frame and tires: check for frame cracks, a straight carriage and forks, and tire cuts or uneven wear.
- Safety: confirm the load chart is in the cab, the load moment indicator and backup alarm work, and the ROPS/FOPS is undamaged.
- Inspection records: ask for the most recent annual inspection.
Use our telehandler inspection checklist and the FleetNow inspection app to document the condition of any unit you are considering.
Shop JCB 507-42 Telehandlers With FleetNow
Browse JCB 507-42 listings, compare other JCB models such as the JCB 510-56 and JCB 512-56, or browse all JCB telehandlers, telehandlers and JCB equipment on FleetNow. New to telehandlers? Start with our telehandler guide.
Cannot find the right unit? Contact the FleetNow team or call 1-216-973-5124. Have equipment to sell? List your equipment on FleetNow.
JCB 507-42 FAQs
The JCB 507-42 has a 7,000 lb (3,175 kg) maximum lift capacity. Dealer load charts show about 6,000 lb at full height and 1,600 lb at maximum forward reach, so always check the load chart in the cab for the job.
It lifts to 42 ft (12.8 m) and reaches about 28 ft forward at ground level.
The 507-42 uses a JCB 4.4 L four-cylinder diesel rated at 74 hp (55 kW). Current Tier 4 Final units need no DEF and no diesel particulate filter.
No. Dealer spec listings show a 4-speed powershift transmission with four-wheel drive and a top speed of about 15.5 mph. The 507-42 is sometimes described as hydrostatic, but that does not match the spec listings.
A JCB 507-42 weighs about 21,300 lb (9,660 kg). Weight varies with cab type, tires and attachments, so check the serial plate before hauling it.
In November 2026, 34 priced JCB 507-42 telehandlers on FleetNow ranged from $29,950 to $137,850. The middle half were $39,850 to $54,000, with a median of $42,850. Most were 2017 to 2019 units.
Both reach 42 ft, but the 509-42 lifts 9,000 lb and uses a larger 109 hp engine, while the 507-42 lifts 7,000 lb with a 74 hp engine. Older 507-42 units usually cost less on FleetNow.
