JLG 1930ES Review: Specs, Price, Pros & Cons
Watch the video of Michael’s full review of the JLG 1930ES below:
Reliability (5/5):
Performance (5/5):
Serviceability (5/5):
Ease of Use (5/5):
Overall Value (5/5):
Michael K., mechanical engineering technician at OHR Rents, recently shared his insights on the JLG 1930ES, emphasizing its user-friendly controls and easy serviceability. With years of experience maintaining scissor lifts, Michael provides a detailed perspective on what makes the 1930ES a solid choice for contractors and technicians alike.
One feature Michael appreciates is the clear, easy-to-read display on the controller, which makes operation straightforward for users. He notes, “The display is very easy to read, which helps operators quickly understand battery levels, fault codes, and system diagnostics without any guesswork.”
When it comes to maintenance, Michael praises the 1930ES for its excellent serviceability, allowing technicians to access key components with minimal effort.
Overall, Michael considers the JLG 1930ES a user-friendly and easy-to-maintain scissor lift, ideal for indoor maintenance, installation, and warehouse work, where clear controls and efficient servicing are key advantages.
What Is the JLG 1930ES?
Last updated: October 19, 2026
The JLG 1930ES is a compact, 19-ft electric slab scissor lift built for indoor work on smooth, level floors. It has an 18 ft 9 in platform height, about a 25-ft working height and a 500-lb platform capacity.
At 30 inches wide, it fits through standard doorways, and its direct electric drive is quiet and emission-free. The “ES” stands for electric drive: unlike JLG’s hydraulic-drive R-series scissors, the drive motors run straight off the 24V battery pack, which means fewer hoses and longer run time per charge.
In this review, we cover its specs, features, technician ratings, used prices, pros and cons, and how it compares with the Genie GS-1930, Skyjack SJIII 3219 and other 19-ft scissor lifts.
JLG 1930ES Specs
| Spec | JLG 1930ES |
|---|---|
| Platform Height | 18 ft 9 in |
| Working Height | 24 ft 9 in (marketed as 25 ft) |
| Platform Capacity | 500 lb |
| Extension Deck | 3 ft roll-out (250 lb capacity) |
| Platform Size | 30 in x 74 in |
| Overall Width | 30 in |
| Overall Length | 74 in (6 ft 2 in) |
| Stowed Height | 6 ft 6 in (rails up) |
| Drive Speed (Stowed / Raised) | 3 mph / 0.5 mph |
| Gradeability | 25% |
| Turning Radius (Inside / Outside) | 0 in / 5 ft 9 in |
| Lift / Lower Time | 26 sec / 30 sec |
| Power System | 24V, four 6V 220 Ah deep-cycle batteries |
| Charger | 20 A automatic, 120/240V |
| Drive Type | Direct electric drive |
| Tires | Solid, non-marking (12.5 x 4 in) |
Specs from JLG dealer spec sheets. See JLG 1930ES units for sale or browse all JLG slab scissor lifts.
JLG 1930ES Key Features
- Compact and Maneuverable Design
With a 30-inch width, the JLG 1930ES easily fits through standard doorways and navigates tight spaces, making it ideal for indoor maintenance, installation, and warehouse tasks.
- 25-Foot Working Height
The lift offers an 18 ft 9 in platform height and roughly a 25-foot working height, providing ample reach for ceiling repairs, light fixture installations, and other overhead jobs.
- Easy-to-Read Display
The clear, user-friendly display on the controller makes it easy for operators to quickly check battery levels, fault codes, and system diagnostics, streamlining operation and troubleshooting.
- Quiet, Zero-Emission Operation
Powered by an electric drive, the 1930ES offers whisper-quiet performance with zero emissions, making it well-suited for noise-sensitive environments like offices, schools, and hospitals.
- Effortless Serviceability
Designed for easy maintenance, the lift offers quick access to key components, allowing technicians to efficiently service the machine and reduce downtime.
- Reliable Platform Capacity
With a 500-pound platform capacity, the JLG 1930ES can safely handle two workers plus tools, making it versatile for a range of light-duty construction and repair tasks.
What Jobs Can a JLG 1930ES Be Used For?
The JLG 1930ES is ideal for a variety of indoor maintenance and installation tasks, thanks to its compact size and quiet, zero-emission operation. It’s commonly used for ceiling repairs, light fixture installations, and HVAC work in commercial buildings, warehouses, and retail spaces. The 25-foot working height makes it perfect for reaching elevated areas, while its narrow frame allows it to navigate tight aisles and fit through standard doorways. Additionally, its low noise output makes it well-suited for office buildings, hospitals, and schools, where minimal disruption is essential.
JLG 1930ES Pros and Cons
Pros
- 30-inch width fits through standard doorways and tight aisles
- Direct electric drive: quieter, fewer hoses and longer run time than hydraulic-drive scissors
- Zero inside turning radius for tight indoor maneuvering
- Easy-to-read controller display for battery level, fault codes and diagnostics
- Rated 5/5 by our technician across reliability, performance, serviceability, ease of use and value
- Huge used supply, so prices are competitive and parts are easy to find
Cons
- Slightly less height than most competitors: 18 ft 9 in platform vs. 19 ft
- 500-lb capacity trails the Skyjack SJIII 3219 (550 lb) and Pettibone AS1932E (510 lb)
- Built for smooth, level floors; not suited to rough or uneven ground
JLG 1930ES vs. Other 19-ft Scissor Lifts
Here’s how the 1930ES compares with the most common 19-ft electric slab scissor lifts.
| Model | Platform Height | Working Height | Capacity | Width | Length |
|---|---|---|---|---|---|
| JLG 1930ES | 18 ft 9 in | 24 ft 9 in | 500 lb | 30 in | 74 in |
| Genie GS-1930 | 19 ft 3 in | 25 ft 3 in | 500 lb | 30 in | 72 in |
| Skyjack SJIII 3219 | 19 ft | 25 ft | 550 lb | 32 in | 70 in |
| MEC 1930SE | 19 ft | 25 ft | 500 lb | 30 in | 73 in |
| Pettibone AS1932E | 19 ft | 25.6 ft | 510 lb | 32 in | 73 in |
On paper, these lifts are close. The 1930ES gives up a few inches of platform height but matches the narrowest 30-inch width, and its electric drive is a plus for battery life. If you need more capacity, the Skyjack SJIII 3219 carries 550 lb. Compare all JLG scissor lifts or slab scissor lifts for sale.
How Much Does a JLG 1930ES Cost?
JLG doesn’t publish list prices. New 19-ft electric slab scissors from the major brands currently list for roughly $15,000–$17,000 at dealers, and a 2025 JLG 1930ES is listed on FleetNow at $15,850.
Used prices are much lower. Because the 1930ES is a common rental fleet machine, there’s plenty of low-hour inventory:
| Model | Example Used Units | FleetNow Asking Price |
|---|---|---|
| JLG 1930ES | 2016–2019, 121–406 hours | $4,200–$5,950 |
| Genie GS-1930 | 2015–2019, 102–262 hours | $4,950–$5,900 |
| MEC 1930SE | 2017–2020, 275–370 hours | $4,200–$7,500 |
| Pettibone AS1932E | 2021, about 120 hours | $6,700 |
Prices are FleetNow asking prices as of October 2026 and change daily. Hours, age, battery condition and location drive most of the spread. See current JLG 1930ES listings.
Where Can I Find a JLG 1930ES for Sale?
You can buy a JLG 1930ES from JLG dealers, auctions or online marketplaces like FleetNow. FleetNow lists ex-rental units from rental yards across the U.S. and Canada, most of them fleet maintained with service records.
Browse JLG 1930ES scissor lifts for sale, see all JLG scissor lifts, or compare every slab scissor lift for sale on FleetNow.
FAQs
Check out these answers to some commonly asked questions about the JLG 1930ES:
As of October 2026, used JLG 1930ES scissor lifts on FleetNow are listed at about $4,200–$5,950 for 2016–2019 models with roughly 120–400 hours. See current JLG 1930ES listings.
They’re very close. Both carry 500 lb and are 30 in wide. The Genie has a slightly higher platform (19 ft 3 in vs. 18 ft 9 in), while the JLG’s direct electric drive offers longer battery life and fewer hydraulic hoses than hydraulic-drive scissors. Compare Genie GS-1930 listings.
Yes. The 1930ES has fold-down guardrails that lower its stowed height to about 5 ft, so it can fit through doorways and under low clearances and load onto trucks more easily.
JLG doesn’t publish an official charge time. With the onboard 20-amp automatic charger, a full charge from a deep discharge typically takes about 8 hours, so most fleets charge overnight.
The JLG 1930ES runs on a 24V system powered by four 6V, 220 Ah deep-cycle batteries. Because it uses direct electric drive, the batteries power the drive motors directly, which helps a single charge last a full workday.
The 1930ES is built for smooth, level floors like slab concrete. It has solid non-marking tires, pothole protection and a 25% gradeability rating, but it isn’t designed for rough or uneven terrain. For outdoor job sites, consider a rough terrain scissor lift.
Follow FleetNow for More on Equipment Reviews,
Maintenance, and Equipment Deals
Shop JLG 1930ES Scissor Lifts With FleetNow
Tell us what you need, and we’ll do the work for you.
If you need construction equipment, you’re in the right place. Send us details about the job and/or specs on the machine you want, and we’ll find you the best options available.
Tell us what you’re looking for:
