JLG Telehandlers: Models, Specs and Prices
Last updated: October 2026
JLG builds a full line of telehandlers for North American job sites, from the compact G5-18A to the 75 ft JLG 1075 and the 15,000+ lb high-capacity 1644. The core lineup (742, 943, 1043, 1055 and 1255) shares a common design and cab, so crews can move between machines easily, and JLG’s sister brand SkyTrak covers much of the same range.
This guide compares JLG’s telehandler models, their specs, used prices on FleetNow, and what to check before you buy one.
In this guide:
JLG Telehandler Lineup and Specs
| Model | Max capacity | Max lift height | Max forward reach | Capacity at max height | Status |
|---|---|---|---|---|---|
| G5-18A | 5,500 lb | 18 ft 5 in | 10 ft 10 in | 4,409 lb | Compact model |
| 642 | 6,600 lb | 42 ft | 29 ft | 6,000 lb | Discontinued |
| 742 | 7,000 lb | 42 ft | 29 ft 1 in | 6,000 lb | Current |
| 943 | 9,000 lb | 43 ft | 30 ft 5 in | 7,000 lb | Current |
| 1043 | 10,000 lb | 43 ft | 30 ft 5 in | 7,000 lb | Current |
| 1055 | 10,000 lb | 55 ft | 42 ft | 5,000 lb | Current |
| 1075 | 10,000 lb | 75 ft | 60 ft | See load chart | Current |
| 1255 | 12,000 lb | 55 ft | 42 ft | 5,000 lb | Current |
| 1644 | 15,650 lb | 43 ft 7 in | 31 ft 1 in | 6,750 lb | Current |
Specs are from JLG and JLG dealer spec sheets for North American (ANSI) models. Model numbers describe capacity and height: the 1055 lifts 10,000 lb to 55 ft. Older G-series machines such as the G10-55A and G12-55A are the 10,000 and 12,000 lb, 55 ft predecessors of today’s 1055 and 1255 class. Always check the load chart in the cab, since capacity drops as the boom extends.
For deeper dives, see our JLG 1055 guide and JLG 1255 guide.
How to Choose a JLG Telehandler
- Tight sites, landscaping and farms: the compact G5-18A fits through gates and into buildings where a full-size machine cannot.
- Residential and light commercial: the 742 and 943 handle trusses, block and shingles up to about 42-43 ft at a lower purchase and hauling cost.
- Most commercial construction: the 1055 is the all-around rental choice, with 55 ft of height and 42 ft of reach. Step up to the 1255 for 12,000 lb loads at the same height.
- High or deep placement: the 1075 reaches 75 ft high and 60 ft out, and uses stabilizers for full capacity.
- Heavy loads: the 1644 lifts over 15,000 lb for steel, precast and industrial work.
Not sure if you need a telehandler or a forklift? Read telehandler vs. forklift, or start with our Ultimate Guide to Telehandlers.
Common JLG Telehandler Features
- Three steering modes: front-wheel, four-wheel coordinated and crab steering on full-size models.
- Frame leveling: levels the machine side to side on uneven ground before lifting.
- Load management: newer units include a load stability indicator or load management system that warns or limits functions as the machine nears its limits.
- Tier 4 Final diesel engines: most current full-size models use Cummins diesels; the 1644 uses a Deutz.
- Attachments: quick-attach carriages for forks, buckets, truss booms, swing carriages and work platforms (where approved).
JLG Telehandler Prices
Used JLG telehandler prices depend mostly on capacity, height, year and hours. Here is what FleetNow sellers were asking in October 2026:
| Model | Priced listings | Model years listed | Asking price range | Typical (middle half) |
|---|---|---|---|---|
| G5-18A | 37 | 2012-2024 | $28,850 – $94,900 | $37,850 – $59,900 |
| 742 | 16 | 2018-2026 | $49,850 – $149,900 | $53,850 – $124,900 |
| 943 | 15 | 2016-2026 | $49,950 – $179,900 | $59,850 – $134,850 |
| 1055 | 41 | 2014-2026 | $47,500 – $194,900 | $64,950 – $135,999 |
| 1255 | 98 | 2015-2026 | $49,850 – $229,900 | $77,850 – $134,900 |
| 1644 | 5 | 2018-2022 | $104,950 – $215,000 | Too few listings |
| 1075 | 2 | 2021-2026 | $214,900 – $353,850 | Too few listings |
Wide ranges reflect a mix of older rental units and nearly new machines. Medians were about $49,850 for the G5-18A, $89,900 for the 1055 and $109,900 for the 1255. Prices change daily, so check current JLG telehandler listings. New units are quoted by JLG dealers and generally cost more than the newest used listings above.
JLG vs. Other Telehandler Brands
JLG competes most directly with Genie and its own sister brand SkyTrak, plus CAT, JCB and Manitou. JLG’s 1055 and 1255 are among the most common 10,000 and 12,000 lb telehandlers in rental fleets, which keeps parts and service easy to find and helps resale. Compare them in JLG vs. Genie telehandlers, or look at the SkyTrak 10054 as a close alternative to the 1055.
What to Check Before Buying a Used JLG Telehandler
- Hours and records: ask for service records, annual inspections and the hour meter reading.
- Boom: extend and retract fully, check wear pads, and look for cracks, weld repairs and bent sections.
- Hydraulics: look for leaks at the lift, tilt, extend and steering cylinders and the hoses.
- Engine and emissions: check for smoke and hard starting, and ask about Tier 4 aftertreatment service.
- Axles, brakes and steering: test all steering modes, frame leveling and the parking brake.
- Safety systems: confirm the load chart is in the cab and the load stability indicator or load management system works.
- Tires and carriage: check tire wear and the quick-attach and forks for cracks or bends.
Use our telehandler inspection checklist and document the walkaround with the FleetNow Inspect app.
Shop Used JLG Telehandlers
FleetNow lists used JLG telehandlers and other telehandlers from dealers and owners across the country. Browse the JLG 1055, JLG 1255, JLG 742 and JLG G5-18A. Need help finding the right machine? Contact our team or call 1-216-973-5124. Selling a telehandler? List it on FleetNow.
JLG Telehandler FAQs
The model number gives the rated capacity and lift height. The first digits are capacity in thousands of pounds and the last two are lift height in feet, so a JLG 1055 lifts 10,000 lb to 55 ft and a 742 lifts 7,000 lb to 42 ft.
The JLG 1075 is the tallest standard JLG telehandler, with a 75 ft lift height and about 60 ft of forward reach. It uses stabilizers to lift its full rated loads.
Weight depends on the model. The compact G5-18A weighs about 11,000 lb, a 742 about 21,500 lb, a 1055 about 31,500 lb and a 1255 about 34,000 lb. Check the serial plate before hauling one.
In October 2026, most used JLG 1055 listings on FleetNow asked between about $65,000 and $136,000, and most 1255s between about $78,000 and $135,000. Compact G5-18As typically asked $38,000 to $60,000.
JLG Industries is owned by Oshkosh Corporation, which bought the company in 2006. JLG is based in McConnellsburg, Pennsylvania.
Yes. SkyTrak is a JLG brand, and both are part of Oshkosh Corporation. SkyTrak telehandlers like the 10054 compete in the same classes as the JLG 1055 and 1255.
The JLG 1055 and 1255 are the most common JLG telehandlers in rental fleets and on FleetNow, thanks to their 55 ft lift height and 10,000 to 12,000 lb capacity. That also makes parts and used units easy to find.
