MCT Scissor Lifts and Maintenance Stands: Models and Specs
Last updated: November 2026
MCT Industries, Inc. is an Albuquerque, New Mexico manufacturer that builds aircraft maintenance stands for the U.S. Air Force and other government customers. When people search for an “MCT scissor lift,” they usually mean the MCT Universal Maintenance Stand (UMS), a 36 ft dual-power scissor platform used on bombers, cargo planes and other wide-body aircraft. MCT also builds smaller hydraulic scissor stands (B4 and B5) and articulating stair stands (B1, B2 and B7).
This guide covers each MCT model with the specs MCT publishes, how these stands differ from the commercial scissor lifts on FleetNow, and what to check before buying a used one.
In this guide:
What Is an MCT Scissor Lift
MCT scissor lifts are aircraft maintenance stands, not general construction lifts. They give maintainers a stable, adjustable work deck next to an aircraft at the flight line or in a depot hangar. The best known is the Universal Maintenance Stand, also called the Universal Maintenance Platform, which reaches 36 ft for work on large aircraft.
MCT redesigned the existing Universal Maintenance Stand under a 1990 Air Force contract, which produced the version MCT calls Gen I. A second Air Force contract in 2009 led to a full redesign, the Gen II, with changes MCT says improved safety, ease of operation and ease of maintenance. According to MCT, both generations are deployed worldwide and support all USAF Major Commands.
Besides maintenance stands, MCT builds other ground support and transport equipment for the Department of Defense, the Department of Energy and private aerospace companies. The company lists ISO 9001:2015 and ITAR registration.
MCT Universal Maintenance Stand Specs
| Specification | Universal Maintenance Stand (UMS) |
|---|---|
| Elevated height | 36 ft |
| Max load capacity | 2,000 lb |
| Power | Dual power: diesel and electric |
| Lift time | 60 seconds |
| Lower time | 90 seconds |
| Machine weight | 17,000 lb |
| Typical aircraft | Bomber, cargo, ISR, command and control, and dignitary support aircraft |
Specs are from MCT. Gen I and Gen II stands differ, and individual stands may have been modified in service, so check the data plate on the unit you are looking at. MCT also offers a split-deck version.
Other MCT Maintenance Stands
MCT also builds smaller stands used across the Air Force fleet. The hydraulic scissor stands (HSMS) raise a deck with a hydraulic actuator. The articulating stair stands (ASMS) combine a staircase and a platform that adjusts with a hydraulic actuator. All are rated for 750 lb.
| Model | Type | Working height | Platform size | Base footprint | Weight |
|---|---|---|---|---|---|
| HSMS Type I / B4 | Hydraulic scissor stand | 3 to 8.5 ft | 86 x 36 in | 96 x 52 in | 1,800 lb |
| HSMS Type II / B5 | Hydraulic scissor stand | 8.5 to 14 ft | 86 x 36 in | 110 x 98 in | 2,100 lb |
| ASMS Type I / B1 | Articulating stair stand | 3 to 12 ft | 66 x 48 in | 132 x 48 in | 2,300 lb |
| ASMS Type II / B7 | Articulating stair stand | 7 to 16 ft | 48 x 84 in | 192 x 60 in | 3,000 lb |
| ASMS Type III / B2 | Articulating stair stand | 13 to 20 ft | 48 x 48 in | 168 x 126 in | 3,150 lb |
MCT says these stands work in temperatures from -40 F to +140 F, can be moved by C-5 and C-17 aircraft, sea, road and rail (the B4, B5, B1 and B7 also fit on a C-130), and meet the applicable parts of OSHA 1910.29, AFOSH 91-100, AFOSH 91-501 and ANSI A92.3.
MCT Stands vs Commercial Scissor Lifts
An MCT stand and a construction scissor lift both raise a work deck, but they are built for different jobs. If you need a lift for construction, warehouse or facility work, a commercial scissor lift is usually easier to buy, service and resell.
| MCT maintenance stands | Commercial scissor lifts | |
|---|---|---|
| Built for | Aircraft maintenance (military spec) | Construction, industrial and facility work |
| Height range | 3 ft (B4) to 36 ft (UMS) | About 19 ft to 50+ ft platform height |
| Drive | Towed or positioned stands; check each unit | Most are self-propelled and can drive at height |
| Parts and service | Through MCT and military supply channels | Wide dealer network for Genie, JLG, Skyjack and others |
| Where to buy used | Government surplus auctions | Dealers and marketplaces like FleetNow |
For comparable reach on a jobsite, look at large rough terrain scissor lifts such as the Genie GS-5390 RT, or our guide to 40 ft scissor lifts.
Pros and Cons of MCT Maintenance Stands
Pros
- Built to military requirements for heavy use around aircraft.
- The UMS combines 36 ft of height with a 2,000 lb load capacity.
- Dual diesel and electric power on the UMS.
- Rated for extreme temperatures and designed for air, sea, road and rail transport.
- Made in the USA.
Cons
- Hard to find outside government surplus sales, and few dealers support them.
- Heavy: the UMS weighs 17,000 lb, so moving it takes a large truck or tow vehicle.
- Parts and manuals can be harder to get than for commercial lifts.
- Built for aircraft work, so they are not a direct replacement for a jobsite scissor lift.
MCT Scissor Lift Price and Where to Buy
MCT does not publish prices. New stands are built to government contracts, so new pricing comes from MCT directly. Used MCT stands come up mainly through government surplus auctions, and prices depend on generation, condition, hours, and whether the stand has been kept in service or sat in storage.
FleetNow does not list MCT stands right now. If you need a lift for construction or facility work, browse used scissor lifts, slab scissor lifts or aerial work platforms on FleetNow. If you have an MCT stand to sell, you can list your equipment.
Used MCT Stand Buying Checklist
- Read the data plate: model, generation (Gen I or Gen II for a UMS), serial number and rated capacity.
- Ask for maintenance and inspection records and any demilitarization or surplus paperwork.
- Raise the deck to full height and lower it: watch for drifting, jerky motion or slow lift and lower times.
- Check hydraulic cylinders, hoses and fittings for leaks, and the scissor arms, pins and welds for cracks or wear.
- Test both power sources on a UMS (diesel and electric) and all emergency lowering and stop controls.
- Inspect guardrails, gates, toe boards and decking, plus stabilizers or outriggers if fitted.
- Confirm you can get manuals and parts, and plan how you will transport a heavy stand.
- Make sure operators are trained for the stand you buy.
For a general walk-through, see our used scissor lift buying guide and scissor lift types.
MCT Scissor Lift FAQs
An MCT scissor lift is an aircraft maintenance stand made by MCT Industries in Albuquerque, New Mexico. The best known model is the Universal Maintenance Stand (UMS), a 36 ft dual-power platform the U.S. Air Force uses on bombers, cargo planes and other large aircraft.
MCT lists an elevated height of 36 ft for the Universal Maintenance Stand. Its smaller stands range from 3 to 8.5 ft (B4) up to 13 to 20 ft (B2).
The UMS has a maximum load capacity of 2,000 lb. The smaller MCT hydraulic scissor stands and stair stands are rated for 750 lb.
Gen I came from a 1990 Air Force contract to redesign the earlier stand. Gen II came from a 2009 contract and is a full redesign that MCT says improved safety, ease of operation and ease of maintenance. Check the data plate to confirm which one you have.
Yes. Used MCT stands mostly come up through government surplus auctions. FleetNow does not list MCT stands right now, but you can compare used commercial scissor lifts at buyfleetnow.com/equipment/scissor-lift.
Yes. Operators should be trained on the specific stand and follow the manual and workplace rules. MCT says its stands meet applicable OSHA 1910.29 and ANSI A92.3 requirements.
Find a Scissor Lift on FleetNow
Compare used scissor lifts from verified sellers across the country, or contact us at 1-216-973-5124 with questions. More guides: All About Scissor Lifts and Scissor Lift FAQs.



