Guide: Skyjack 4626 Electric Scissor Lift

If you want a tough, durable, reliable electric scissor lift, get a Skyjack 4626 electric scissor lift. Drivable at full height, the lift has dual holding brakes and an analog control system. The electric scissor lift has a maximum working height of 104.98 feet, enough to reach the most elusive heights of the house. Add to that a compact size, low operating noise, and lightweight design-the Skyjack becomes an excellent solution for most of your commercial or residential needs.

Skyjack SJ4626 Features

Standard 4626 features include:

Drivable when fully extended
Variable speed with dual rear hydraulic drive
Double holding brakes
Intuitive lift/drive control functions
4′ (1.2 m) spacious roll-out deck
24Volts Direct Current power source
Low voltage protection
Analog control system
Color-coded and numbered wiring system
25 percent gradeability
Solid rubber non-inflatable tires
Crater protection system
110V Alternating Current platform power outlet
Tilt alarm
Lift and drive cut-out
Loud enough all motion alarm system
Operator horn
Hinged railing system
Tie down lugs
Lanyard hooking points
Forklift pockets

Skyjack SJ4626 Scissor Video

The following video demonstrates how the Skyjack 4626 works:

Skyjack 4626 Specs

Standard skyjack 4626 scissor lift specs include:

Lowered Platform Height: 147.64 / 1.1 m
Platform Width (Inside Dimension): 3.60 feet / 1.1 m
Work Height: 104.98 feet / 9.8 m
Raised Platform Height: 85.30 feet / 7.9 m
Platform Length (Inside Dimension): 6.89 feet / 2.1 m
Stowed Height : 6.89 feet / 2.1 m
Stowed Height : 5.90 feet / 1.8 m
Turning Radius (Inside): 3.93 feet / 1.2 m
Turning Radius : 7.87 feet / 2.4 m
Extension Deck : 3.93 feet / 1.2 m)
Ground Clearance: 6.23 feet / 1.9 cm
Width: 150.91 feet / 1.2 m
Gradeability: 25%
Lift Time : 54 sec
Capacity : 1,000 pounds / 454 kg
Drive Speed : 2 mph / 3.2 km/h
Drive Speed: 0.7 mph / 1.1 km/h
Maximum number of Persons: 3
Overall Length: 7.55 feet / 2.3 m
Wheelbase: 5.90 feet / 1.8 m
Weight: 4,700 pounds / 2,132 kg

Skyjack 4626 Manual

Here is the link to Skyjack 4626 operating manual.

Skyjack 4626 Fault Codes

Here is the link to the manual containing Skyjack 3219 fault codes. Please scroll down to the troubleshooting section. Some common fault codes include:

(DCM1) – Defective Pump Motor
(F1) – Fuse defective
(S1) – Main Battery Disconnect Switch defective/ open
(C1) – Defective Contactor
(C1) / (CB2) – Loose / Broken wire from circuit breakers
(CB1) – Tripped/ Defective Circuit Breaker
(L1CR) – Defective Battery Charger Relay.10.
(L1CR) / (CB2) – Broken/loose wires from Circuit Breaker or Battery Charger Relay
(TB-1).13 – Broken/loose wire from Circuit Breaker (CB1)/ Pump Motor (DCM1).14