SkyTrak 10042 Telehandler: Specs, Price and Buying Guide

Last updated: October 2026

The SkyTrak 10042 is a 10,000 lb telehandler with a 42 ft 1 in lift height and 26 ft 7 in of forward reach. It can still lift 6,000 lb at full height, which makes it a strong fit for jobs that need heavy loads placed on second and third floors, roofs and scaffolding. SkyTrak is JLG’s telehandler brand, and the 10042 is one of the most common 10,000 lb telehandlers on North American job sites.

This guide covers the 10042 specs and features, how it compares to the SkyTrak 8042 and 10054, what it costs new and used, and what to check before you buy one.

In this guide:

• SkyTrak 10042 specs
• Key features
• How it compares
• Pros and cons
• Common uses
• SkyTrak 10042 price
• What to check before buying used
• FAQs

Specs are from JLG and SkyTrak product data for current-generation units. Older 10042 models used different engines, and dimensions vary with tires and options, so check the serial plate, load chart and operator manual on any machine you are considering.

Heavy capacity at full height. The 10042 lifts its full 10,000 lb rating close in and still handles 6,000 lb at its maximum 42 ft 1 in lift height, more than many larger telehandlers can carry up high.

Stabil-TRAK stability system. SkyTrak’s rear axle stabilization system locks the rear axle when the boom is raised or loaded, which helps keep the machine steady when placing a load.

Frame leveling. Up to 10 degrees of frame sway lets operators level the machine on uneven ground before lifting.

Single joystick control. One joystick runs all boom functions. On newer models it also controls the auxiliary hydraulics and attachment tilt.

Towing hitch. The rear counterweight includes an integrated tow hitch for moving trailers and equipment around the site.

2026 redesign. JLG updated the 10042 in 2026 with a Tier 4 Final Cummins F3.8 engine, a 4-speed powershift with SmartShift automatic shifting between third and fourth gear, a larger cab display, single-page load charts and standard ClearSky Smart Fleet telematics.

Within the SkyTrak line, the 10042 sits between the lighter 8042 and the taller 10054. All three share a 42 ft or taller lift height, but they trade off capacity and reach differently.

Choose the 10042 when most of your loads are heavy and placed within about 40 ft, such as pallets of block, brick or roofing material. The 8042 offers more reach for lighter loads, and the 10054 adds about 11 ft of height and 12 ft of reach but carries less at full height. See our SkyTrak 10054 guide for a full breakdown, or read The Ultimate Guide to Telehandlers to compare telehandler types.

Price ranges are asking prices on FleetNow in October 2026 and include some new and low-hour dealer units at the top of each range. 8042 figures are from a sample of current listings.

• 6,000 lb capacity at full height, the same as the 8042 but with 2,000 lb more rated capacity
• Stabil-TRAK and frame leveling help with load placement on rough ground
• Simple, proven design that most rental and service techs know well
• Wide parts and service support through the JLG dealer network
• Integrated tow hitch adds job-site versatility

• Shorter forward reach than the 8042 and most 10,000 lb, 50 ft class telehandlers
• At about 27,300 lb, it needs a heavy-duty trailer to haul
• Tier 4 Final units with the standard engine use DEF and emissions systems that add maintenance
• Many used units are former rental machines with high hours

• Masonry: placing pallets of block and brick on scaffolding
• Roofing: lifting shingle bundles, rolls and HVAC curbs onto low- and mid-rise roofs
• Framing and residential construction: setting trusses, lumber packs and sheathing
• Commercial construction: moving steel, drywall and mechanical equipment around the site
• Agriculture: handling bales, feed and bulk material with buckets or bale spears
• Industrial and yard work: unloading trucks and moving heavy materials with forks, jibs or buckets

Not sure whether you need a telehandler or a forklift? See Telehandler vs. Forklift.

FleetNow had 9 SkyTrak 10042 telehandlers listed in October 2026, from 2013 to 2019 models. Asking prices ran from $35,850 to $77,950, with a median of $49,850. The middle half of listings asked between $45,850 and $54,900, and most units showed about 2,000 to 5,000 hours.

New and nearly new 2025 and 2026 10042 units were listed by dealers on other marketplaces at about $127,000 to $155,000 in October 2026. Price depends on hours, condition, engine and emissions system, attachments, cab options and service history. With few 10042 listings at a time, it is worth comparing the SkyTrak 8042 and SkyTrak 10054 too.

• Hours on the meter, plus service and annual inspection records
• Boom sections, wear pads, chains and sheaves for wear and proper adjustment
• Boom drift: raise and extend the boom with a load, then watch for it creeping down or retracting
• Lift, tilt, extend and leveling cylinders, hoses and fittings for leaks
• Frame leveling and the Stabil-TRAK rear axle lock work as designed
• Transmission shifts cleanly through every gear in forward and reverse
• All steering modes, axles, brakes and the parking brake
• Tires for cuts, chunking and uneven wear
• Engine starts easily, with no smoke, leaks or warning codes; on Tier 4 Final units, check the DEF and aftertreatment system
• Carriage, forks and quick-attach for cracks, bends and worn pins
• Cab, ROPS/FOPS, seat belt, lights, alarms, load charts and decals are in good shape, and the manual is on board

Ask the seller for photos of the hour meter and serial plate, and lift a load to full height before you buy. Sellers can document a machine with the FleetNow Inspect app.

FleetNow lists used SkyTrak 10042 machines and other SkyTrak telehandlers from dealers and owners across the country. Need a different size? Compare the SkyTrak 6042, 8042, 10054 and 12054, browse JLG telehandlers and Genie telehandlers such as the Genie GTH-1056, or see all used telehandlers.

Questions about a listing? Contact the FleetNow team or call 1-216-973-5124. Selling a machine? List your equipment on FleetNow.