Xtreme Telehandlers: Models, Specs and Prices
Last updated: November 2026
Xtreme Manufacturing is a Las Vegas-based maker of heavy-duty telehandlers, best known for high-capacity models that lift 10,000 to 70,000 lb, well beyond the typical 5,000-12,000 lb range of Genie, JLG and SkyTrak. This guide covers the main Xtreme XR models, how the model names work, used prices on FleetNow, and what to check before buying.
In this guide:
Xtreme Telehandler Models
| Model | Max lift capacity | Max lift height | Turning radius |
|---|---|---|---|
| XR1045 | 10,000 lb | 45 ft | 144 in |
| XR1245 | 12,000 lb | 45 ft | 146 in |
| XR1255 | 12,000 lb | 55 ft | 168 in |
| XR1270 | 12,000 lb | 70 ft | 190 in |
| XR2045 | 20,000 lb | 45 ft | 190 in |
| XR7038 | 70,000 lb | 38 ft | 294 in |
Specs from AllMachines’ Xtreme listings (November 2026), which lists these as out-of-production model years; Xtreme’s own site does not allow automated access, so check current specs and the load chart with a dealer. Engines are Perkins on most models and Cummins on the XR7038. Xtreme has also built the XR1055, XR1555 and smaller XR6 and XR8 models, which are common on the used market.



How Xtreme Model Names Work
Xtreme names follow a simple pattern: XR, then the capacity in thousands of pounds, then the lift height in feet. So an XR1055 lifts 10,000 lb to 55 ft, an XR1255 lifts 12,000 lb to 55 ft, and an XR7038 lifts 70,000 lb to 38 ft. Always check the load chart: capacity drops as the boom extends forward.
Xtreme vs Other Telehandler Brands
In the 10,000-12,000 lb class, Xtreme competes with the Genie GTH-1056, JLG 1055 and SkyTrak 10054. Above 12,000 lb there are few alternatives, which is where Xtreme’s 15,000-70,000 lb models stand out for steel erection, precast, mining and heavy industrial work. The trade-off is a smaller dealer network than Genie or JLG, so check parts and service support before you buy.
Compare the main brands in our telehandler guide and JLG vs Genie telehandlers.
Used Xtreme Telehandler Prices
| Listing (Nov 2026) | Hours | Asking price |
|---|---|---|
| 2018 Xtreme XR1055 | 3,086 | $65,850 |
| 2020 Xtreme XR1555 | 4,745 | $114,850 |
| 2019 Xtreme XR1255 | 3,206 | $119,900 |
| 2013 Xtreme XR2045 | 6,611 | $149,900 |
| 2023 Xtreme XR1055 | Not listed | $239,900 |
These are the active Xtreme listings on FleetNow in November 2026. Prices vary widely with capacity, hours and options, so compare the load chart and condition rather than the price alone. See all used Xtreme telehandlers or all used telehandlers.
Used Xtreme Telehandler Buying Checklist
- Confirm the model, serial number and load chart in the cab match the attachments you will use.
- Check the hour meter and service records, including boom wear pad and chain inspections.
- Extend and retract the boom fully: watch for jerky movement, drift and noise, and check wear pads for gaps.
- Look for hydraulic leaks at the boom, tilt and frame-level cylinders and the outriggers if fitted.
- Test all steering modes (front, four-wheel and crab), the frame leveling and the load moment indicator.
- Inspect the frame, boom and carriage welds for cracks, especially on high-capacity units.
- Check axles, tires and brakes, and confirm the engine starts, idles and pulls cleanly.
- Confirm parts and dealer support near you.
See our telehandler inspection checklist and telehandler safety guide.
Xtreme Telehandler FAQs
Xtreme Manufacturing, a telehandler and aerial equipment maker based in Las Vegas, Nevada. It is known for high-capacity telehandlers that lift up to 70,000 lb.
Xtreme model names give the capacity in thousands of pounds and the lift height in feet, so an XR1055 lifts 10,000 lb to 55 ft. Capacity drops as the boom extends, so always check the load chart.
The XR7038 is rated for 70,000 lb with a 38 ft lift height, far beyond typical construction telehandlers.
Active Xtreme listings on FleetNow in November 2026 ranged from $65,850 for a 2018 XR1055 with 3,086 hours to $149,900 for a 2013 XR2045, with a 2019 XR1255 at $119,900.
Xtreme telehandlers are built for heavy lifting and are common in steel, precast and industrial work. The main trade-off is a smaller dealer network than Genie or JLG, so confirm parts and service support nearby.
In the 10,000-12,000 lb class, Xtreme competes with the Genie GTH-1056, JLG 1055 and SkyTrak 10054. Above 12,000 lb, Xtreme offers models that most other brands do not build.
Shop Xtreme and Other Telehandlers
Browse all Xtreme equipment or compare used telehandlers from every brand. Questions? Contact us at 1-216-973-5124. Selling a telehandler? List your equipment on FleetNow.




